Formed by a pneumatic cylinder of calibre 50 governed by a hidrocontrol of the H40 model (technical leaves 040) to obtain precise, adjustable and with great uniformity advances

Designed in tandem for inferior routes to 200 m.m.

CHARACTERISTICS

Pressures of work in the pneumatic cylinder - from 1 to 16 bar (nominal 6 bar.).

Adjustable speed from 0.02 to 16 m/min (0.15 up to 10 m/min with 6 bar in feeding).

Speed in the recovery sense. - 12 m/min (feeding to 6 bar).

Operating temperature. - from -15ºC up to 90ºCs.

The precision of the controlled advance depends on the load supported by hidrocontrol (see graphical of leaf 040-1).

Its operation cadence reaches 7m/min of controlled route with feeding, at 6 bar and a 20º Cs. Atmosphere. 

Centralized compensator. - The systems with several cylinders can incorporate a common compensator for all of them. In this case the cylinders do not have filling fluid entrance nor compensator.