System of linear pile up modules for NG6 or NG10 distributors, with P and T general ways continuous and threaded in all the modules.

Very versatile system, it allows to assemble a compost circuit without base nor terminal plate only with the combination of the modules, making sure that they can be assembled correctly together. (If any doubt, ask the manufacturer)..

The closing of the internal ways is made by stoppers (except HB29R, with caps) and the pressure regulation is made by pressure limiters.

To assemble more than 4 modules, an intermediate module is available with the fixation holes threaded to reduce to the half the braces length (HB2992I)

BASE PLATES WITH PRESSURE LIMITERS

ECO1M
ECO series: plates with special characteristics that make them versatile, interchangeable and very economical, owed to a unique fixation in all its variants.
With two types of limiter cartridge: HLP30 direct switching or balanced HRP27.

• Cartridge HLP30 Maximum flow 40 l./min.
Spring tare (Maximum pressure): 30, 50, 80, 150, 210 and 320 bar.
• Cartridge HRP27 Maximum flow 100 l./min.
Spring tare (Maximum pressure): 80 and 315 bar.
• Connections P= G3/8” T= G1/2”
• Measures 90x90x50
• Material = GGG50 cast-iron

Reference for the supply:
ECO1M301     Modular limiter, HLP30 cartridge (wheel)
ECO1M302     Modular limiter, HLP30 cartridge (screw)
ECO1M27       Modular limiter, HRP27 cartridge
(Refer the maximum pressure)

PR1M
PR series: plates with special characteristics with a unique 80mm circular standard accommodation. Identical fixation as in the one in the Eco series. Versatile, interchangeable and easy installable plates.
Can install in its base two types of cartridge: HLP30 direct switching or balanced HRP27.

• Cartridges HLP306 / 307 Maximum flow 40 l./min.
Spring tare (Maximum pressure): 30, 50, 80,
150, 210 and 320 bar.
• Cartridge HRP27 Maximum flow 100 l./min.
Spring tare (Maximum pressure): 80 and 315 bar.
• Connections P= G3/8” T= G1/2”
• Measures 90x90x50

Reference for the supply:
PR1M301     Modular limiter, HLP30 cartridge (wheel)
PR1M302     Modular limiter, HLP30 cartridge (screw)
PR1M27       Modular limiter, HRP27 cartridge
(Refer the maximum pressure)

HLP2930MC
High-low pressure.

To adjust and limit the assigned circuit at a low (HLP30) and at a high (HLP29) pressure. Precise, watertight and silent valves, apt to work without stop.
The maximum adjustable pressures depend on the tare of the springs incorporated in the regulating cartridges.

• Springs tare (Maximum pressures): 30,80,210 and 320 bar.
• Connections T= G1/2” P= G3/8”
• Max. troughput= 50 l./min.
(35l/min. Recommended)
• Measures 175x79x79
• Material = F114

Reference for the supply:
HLP2930MC     Modular limiter at high and low pressure
(Refer the maximum low and high pressures)

D-RM46/MP
To limit the assigned circuit pressure. Precise, watertight and silent valve, apt ot work without stop.
The maximum adjustable pressure depends on the tare of the srping incorporated in the limiting cartridge HLP29.

• Spring tare (Maximum pressure): 30, 50, 80, 150, 210 and 320 bar.
• Connections T= G1/2” - G3/4” P= G1/2” M= G1/4”
• Max. troughput= 50 l./min.
• Measures 153x80x57
• Material = Cast-iron G25

Reference for the supply:
D-RM46/MP     Modular limiter with HLP29 cartridge
(Refer the maximum pressure)

HLP29ACE
With accommodation for exclusion valve.

To limit the assigned circuit pressure. Precise, watertight and silent valve, apt ot work without stop.
The maximum adjustable pressure depends on the tare of the spring incorporated in the HLP29 limiter cartridge.

• Spring tare (Maximum pressure):30, 50, 80, 150, 210 and 320 bar.
• Connections T’= G1/2” P, T= G3/8” M= G1/4”
• Max. troughput= 50 l./min.
• Measures 65x54x148 máx.
• Material = F114
• Fixation screws M8
(Look up for ‘Exclusion systems’ on page 106 catalogue)

Reference for the supply:
HLP29ACE1    System 1 base with HLP29 limiter and exclusion valve (wheel)
HLP29ACE2    System 1 base with HLP29 limiter and exclusion valve (screw)
(Refer the maximum pressure)

MODULAR PRESSURE LIMITERS

HLP29M
To limit the assigned circuit pressure. Precise, watertight and silent valve, apt ot work without stop.
The maximum adjustable pressure depends on the tare of the spring incorporated in the HLP29 limiter cartridge.
• Pressures 30, 50, 80, 150, 210 and 320 bar.
• Connections P-T= G3/8” - G1/2” M= G1/4”
• Max. troughput= 50 l./min.
• Measures 142x54x54
• Material = F212

Reference for the supply:
HLP29M1     Modular limiter with HLP29 cartridge (wheel)
HLP29M2     Modular limiter with HLP29 cartridge (screw)
(Refer the maximum pressure)

HLP29P
Fixation holes of the pasante modules
To limit the assigned circuit pressure. Precise, watertight and silent valve, apt ot work without stop.
The maximum adjustable pressure depends on the tare of the spring incorporated in the regulating cartridge

• Pressures 30, 50, 80, 150, 210 and 320 bar.
• Connections P and T= G3/8” Pm= G1/4”
• Max. troughput= 50 l/min.
• Measures 142x54x54
• Material = F212

Reference for the supply:
HLP29P1     Modular intermediate limiter, cartridge HLP29 (wheel)
HLP29P2     Modular intermediate limiter, cartridge HLP29 (screw)
(Refer the maximum pressure)

TERMINAL PLATES

   HB29R    Terminal plate for a modular flor regulator
                Connections A-B-P-T= G3/8”           Measures 85x54x20
                Material = Cast-iron G25

* Plate also included on page 90 “Base plates for modular regulators“
*Also look up for “Modular regulators” on pages from 86 - 88. (catalogue)

NG6 MODULES

   HB292S Two stations NG6 module, serial connection
               Connections A-B-P-T= G3/8”         Measures 85x58x110
               Material = Cast-iron G25

    HB2992 NG6 module, lateral duplicated P way connection
                Connections A-B-P-T= G3/8”         Measures 85x54x54
                Connection T’= G1/2”
                Connection Pm= G1/4”
                Material = Cast-iron G25

    HB2992l NG6 intermediate module, lateral duplicated P way connection
                 Connections A-B-P-T= G3/8”          Measures 85x54x54
                 Material = Cast-iron G25

NG10 MODULES

  HB2995 NG10 module to be placed on edge
              Connections A-B-T’= G1/2”         Measures 85 x60x75
              Connection T-P= G3/8”                Material = Cast-iron G25
              Connection Pm= G1/4”

BRACES AND NUTS