System of linear pile up modules for NG10 distributor

System with several possible fixation bases, intermediate modules and terminal plates, depending on the application necessities, offering continuity to the general P and T ways (does not need pipes)., Versatility and rapidity of assembly.

The closing of the internal ways is made by terminal plates and the pressure regulation is made by pressure limiters.

BASE PLATES WITHOUT PRESSURE LIMITER

        1655385    Base plate with duplicated lateral and inferior P and T connections
                        Connections P= G1/2"      T= G3/4"      Measures 120x80x 63
                        Material = F-114
     

BASE PLATES WITH PRESSURE LIMITER

HLP60M / HRP60M To adjust and limit the assigned circuit pressure. Precise, watertight and silent valve, apt ot work without stop.

The maximum adjustable pressure depends on the tare of the spring incorporated in the regulating cartridge HLP60 or HRP60.

• HLP60M, Spring tare ( Maximum pressure): 50, 100, 200 bar.
• HRP60M, Spring tare ( Maximum pressure): 100, 200 and 315 bar.
• Connections P= G1/2” T= G3/4”
• Max. troughput= 100 l./min.
• Measures 206x80x80
• Material = F114
• Fixation DIN912 M6

Reference for the supply:
HLP60M1      Modular limiter direct valve, cartridge HLP60 (wheel)
HLP60M2      Modular limiter direct valve, cartridge HLP60 (screw)
HRP60M1     Modular limiter balanced valve, cartridge HRP60 (wheel)
HRP60M2     Modular limiter balanced valve, cartridge HRP60 (screw)
(Refer the maximum pressure)

PR5M / PR5MR PR series: plates with special characteristics, with a unique 80mm circular standard accommodation and identical fixations as in ECO series. Versatile, interchangeable and easy to install plates.

PR5M / PR5MR Can insert in its base two types of cartridge: HLP60 direct switching or balanced HRP60.

• HLP60M, Spring tare ( Maximum pressure): 50, 100, 150, 200 bar.
• HRP60M, Spring tare ( Maximum pressure): 100, 200 and 315 bar.
• Connections P - T= G3/4”
• Connection lateral T= G1/2”
• Max. troughput= 100 l./min.
• Connections P-T= G3/4”
• Measures 115x89x88
• Material = GGG50 cast-iron

Reference for the supply:
PR5M601        Modular base with direct limiter , HLP60 cartridge (wheel)
PR5M602        Modular base with direct limiter, HLP60 cartridge (screw)
PR5MR601     Modular base with balanced limiter, HRP60 cartridge (wheel)
PR5MR602     Modular base with balanced limiter, HRP60 cartridge (screw)
(Refer the maximum pressure)

NG6 MODULES

  HB5332      Intermediate NG6 module
                   Connections A-B = G3/8”         Measures 96 x70x50
                   Connection T’ = G1/8”               Material= F114

NG10 MODULES

    HB5392     Intermediate NG10 module
                   Connections A-B = G1/2””         Measures 96x70x75
                   Material = F-114
    

TERMINAL PLATES

    HB5394   Terminal plate
                 Connections Pm = G1/4””        Measures 96x70x30
                 Material = F-114

    HB5395HC   Terminal plate with retention
                     Connections A-B = G1/2”        Measures 96x70x75
                     Material = F-114
    

BRACES AND NUTS